Table of Contents
Advertisement
Current multi-broadcast group configuration page (Fig 18-22)
7. SNMP configuration
(1) SNMP TRAP configuration page
SNMP TRAP configuration page (see Fig 18-23) allow the user configuration to receive IP
address of TRAP news workstation and some parameters of TRAP protocol packet, and 8
entries can be set up.
3 entries exist in the page when default; they are inactive, which means they can not be used; 2
entries out of the 3 can be deleted instead of all, which means at least 1 item should be saved.
When set up the entries, and the number of purposed port of default parameter of TRAP is 162,
TRAP wrap can not be re-sent; if time of re-sent exceed with 15 seconds intervals and SNMP
version is SNMPV1 version. User can change all the parameters; if setup can be done active will
be displayed in the entry; if configuration can be done, SNMP TRAP function can work; if Link up
or Link down happen, switch send TRAP wrap to the purpose address automatically.
Advertisement
Table of Contents
