Table of Contents
Advertisement
through the port.
When user perform MAC binding, first you select port of MAC address to be bound in which
VLAN NO. and MAC address can be input, then bind to port. If no entry exists on page, it means
no MAC address binding; if one or more entries in the list, it means MAC address is bound.
When user unbinds the port, you can mark on small frame in front of IP address need to be
unbound, then click key of unbinding to unbind. If users want to unbind all the MAC address on
the port, you can click key of select all and select binding key. No indication is shown if user
failed in setup.
Figure 18-39.MAC Address Manual Binding Configuration Page.
(4) MAC address automatic binding configuration page
MAC address (Figure 18-40) automatic binding configuration page allow user to bind the MAC
address learn from a port to the port automatically; when binding MAC address to a port is
finished, Only the mainframe with bound MAC address instead of the mainframe without MAC
address can access the internet through the port.
When user performs the MAC address, you select Port of MAC address need to be bound; if no
MAC address bound to the port there is no small frame in front of entries of form; if no MAC
address bound to the port, system put the MAC address learn by port into the form with on small
frame in front of each entry. User can mark on small frame in front of MAC address to be bound,
then select the binding key to bind MAC address. If user wants to bind all the learnt MAC
address, you can click Select All key then select binding key. Figure 18-41 shows the page after
Advertisement
Table of Contents
