Table of Contents
Advertisement
and snmpV3 mode. The command default is configured with purpose port of 162.
●
show snmp trap
Mode：CONFIGURATION
Function：show all trap configuration
●
no snmp trap <trap-name>
Mode：CONFIGURATION
Function：delete trap of appointed name
●
snmp trap ip <trap-name> <ip-address>
Mode：CONFIGURATION
Parameter：
trap-name：Trap Name
ip-address：Purpose IP address
Function：modify purpose IP address of appointed trap-name is ip-address
●
snmp trap port <trap-name> <port>
Mode：CONFIGURATION
Parameter：
trap-name：Trap name
port：purpose port
Function：modify the purpose port of appointed trap-name
●
snmp trap retries <trap-name> <retries>
Mode：CONFIGURATION
Parameter：
trap-name：trap name
retries ：re-send times
Function：modify specify re-send times of trap of trap-name is retries. SnmpV1 does not
support the parameter.
●
snmp trap timeout<trap-name> <timeout>
Mode：CONFIGURATION
Parameter：
trap-name：Trap name
retries ：overtime
Function： modify specify overtimes of trap of trap-name is timeout, unit of timeout is 1/100
seconds，SnmpV1 does not support the parameter. For there is not confirmation system in
Advertisement
Table of Contents
