File Management Configuration - UTStarcom iSpirit 3026 Manual

To show all TCP and UDP connections
Switch# show connection
To clear TELNET password
Switch# clear telnet password
To get system time
Switch# get time
To set idletime before automatic logout from CLI
Switch# idletime <timeout>
To show idletime
Switch# show idletime
To set system time
Switch# set time
To set system prompt
Switch# switchname <switch-name>

1.2 File management configuration

After changing the configuration, you had better save it to flash, thus after reset, the
configuration will still work. Users can also download or upload configuration file using TFTP.
1.Commands
Users can save configuration under any CLI mode by just type the command "save".
Under the overall configuration mode, you can backup the configuration file by uploading it to a
host
upload configuration <ip-address><file-name>
ip-address: the IP address of the destination PC for uploading
name: configuration file name
Under the overall configuration mode, you can download a configuration file from a host
download configuration <ip-address><file-name>
ip-address: the IP address of the source PC for downloading
name: configuration file name
(You need to start the TFTP program on the PC before the downloading/uploading)
Notes:
to let the configuration file take effect, the switch has to be restarted;