Table of Contents
Advertisement
Following command under global CONFIG mode one port is bound with MAC Add. If
vlanid and mac-address parameter are not input it will carry out auto binding with MAC Add, to
make relative items in ARL Table be bound with MAC Add. If vlanid and mac-address parameter
are input to carry out manual binding with MAC Add, if you want to bind with more MAC Add.
mac bind <port> [<vlanid> <mac-address>] should be repeated.
Notes:
For auto binding with MAC Add. invalid or failed binding with MAC maybe caused by
follows:
802.1x has been set into Auto, Force-authorized or Force-unauthorized
There are not items for this port in ARL Table
For manual binding with MAC Add., invalid or failed binding with MAC maybe caused by
follows:
802.1x has been set into Auto, Force-authorized or Force-unauthorized
This port has been bound with items with the same VLAN and MAC
This port has been bound with 128 MAC Add.
Folloing command under global CONFIG mode to release MAC Add. binding, if vlanid
and mac-address parameter are not input, release all MAV binding under this port. If
vlanid and mac-address parameter are input release one appointed MAC Add binding
under this port:
no mac bind <port> [<vlanid> <mac-address>]
Following command under global CONFIG mode shows MAC Add binding info. If port
parameter is not input, all ports' MAC Add binding info will be shown. If port paramter is
input, appointed port's MAC Add binding info. as
show mac bind [port] will be shown
Advertisement
Table of Contents
