Table of Contents
Advertisement
● Following under global CONFIG mode releases IP Add binding of one port, all IP Add binding
will be released if ip-address parater is not input; specific IP Add binding will be released if
ip-addre ss parameter is input: no ip bind <port> [ip-address]
● Following under global CONFIG mode showing IP Add binding info. All IP Add binding info of
all ports will be shown if Port paramter was not input. show ip bind [port] as that of the specific
port will be shown if Port parameter was input.
10.3 Sample of IP Binding Configuration
Figure 10-2.Sample of IP Binding
One user is connected to the port 1 of 3026 switch, whose IP Add is 192.168.1.100, for safe
considering to carry out IP control in this port, only this IP Add can be carried out with data
communication through Port 1, and use of IP Binding function as Switch# ip bind 1
192.168.1.100 Switch# show ip bind ip bind port information port ipAddr 1 192.168.1.100 in the
switch
Advertisement
Table of Contents
