Table of Contents
Advertisement
Figure 18-4 Error Message
8. Entry
There is an Entry on the very left of sheet on some page, (see Figure18-5); different lines can be
accessed through the Entry. When you select some value on the Entry relevant information
about the line will be shown on the first line, and only the line can be compiled at that moment;
the line is can be called active line. When one page is added for the first time, new is displayed
on entry, and active line is empty.
If new line is to be added, new should be selected from under-menu of entry, and input new
message, then press SAVE or APPLY key. If you compile the exist line, you should select
relevant line NO. from under-menu of entry, and compile and change the line according to the
requirement, then press SAVE and APPLY key, at last you will see relevant change displayed in
the form. If you want to delete a line, you should select relevant line NO. from under-menu of
Entry, and press Delete key, then the line will disappear from the form.
Advertisement
Table of Contents
