UTStarcom iSpirit 3026 Manual page 123

Command list:
1.acl-filter <groupId>
Mode：PORT CONFIGURATION
Parameter：
groupId：ACL number bound with port
Function: configure with ACL port filtration
Notes:
Failed or invalid configuration maybe caused by follows:
Regulation group "groupId" is not exist or the status is not active
This port has been carried out with ACL filtration
This port has been carried out with IP binding
This port has been the QoS Untrust port
Many regulations are in ACL group or FFP has been used by QoS and other applications
2.Show acl-filter [port]
Mode：PORT CONFIGURATION/CONFIGURATION
Parameter：
M/P：menu item, only ACL group of current port can be shown
Function：Filtration configuration of ACL ports can be shown
3.no acl-filter <groupId>
Mode：PORT CONFIGURATION
Parameter：
groupId：ACL number bound with the port
Function：delete current port and relative configuration with ACL port