Configuration Of Acl Filtration - UTStarcom iSpirit 3026 Manual

A.B.C.D wildcard can control the IP address come from a network; (2) Any is equal to A.B.C.D
255.255.255.255; (3) host A.B.C.D is equal to A.B.C.D 0.0.0.0, srcPort: it is for the condition that
protocol is tcp or udp, resource port of data packet can be controlled, some familiar port service
name can be used as input ways to be input, e.g. www, or data such as 80. destination: there
are 3 kinds of input methods: (1) A.B.C.D wildcard can control the IP address come from a
network; (2) Any is equal to A.B.C.D 255.255.255.255; (3) host A.B.C.D is equal to A.B.C.D
0.0.0.0, srcPort: it is for the condition that protocol is tcp or udp, purpose port of data packet can
be controlled, and the input is the same with that of srcPort.
● Extended Mac Regulation: it controls the forwarding of data packet through mac address,
purpose mac address, vlan ld, and protocol type. Command format: access-list <groupId>
{deny|permit} <vlanId> <type> <source> <destination> parameter instruction: groupId: visit
control list number, extended MAC ACL supports groups from 400 to 599. regulation number is
increased one by one, which is generated by the system automatically. deny/permit: the data
packet can be denied or permitted to be forwarded if they are well matched. vlanId: you can
input the "0" if it needs not to be matched. Type: it means he protocol type such as ip, arp, and
rarp etc. you may also input hexadecimal data such as 0806(ip). Source: resource IP has two
kinds of input methods: 1) AA:BB:CC:DD:EE:FF wildcard, network of MAC address can be
controlled (the similar with IP address); 2) any is equal with AA:BB:CC:DD:EE:FF
FF:FF:FF:FF:FF:FF, destination: purpose IP has two kinds of input ways:
1)AA:BB:CC:DD:EE:FF wildcard, network of MAC address can be controlled (the similar with IP
address); 2) any is equal with AA:BB:CC:DD:EE:FF FF:FF:FF:FF:FF:FF.
Other Command List
Show access-list [group id]
Shows that configured regulation list in current ACL. Regulation list in current group should be
deleted if groupId is input, otherwise all regulation lists will be shown.
no access-list <groupId> [ruleId]
Delete appointed regulation list. Appointed regulation should be deleted if "ruleId" is input,
otherwise all regulations in "groupId" group should be deleted. If which is failed maybe caused
by that the regulation is used by other applications.

11.4 Configuration of ACL Filtration

All ports defaulted by iSpirit 3026 switch are not carried out with ACL filtration.