Mac Binding Configuration Showing - UTStarcom iSpirit 3026 Manual

9.3 MAC Binding Configuration Showing

Figure 9-2. MAC Binding Showing
One user connects to the port 1 of 3026 switch, and the MAC Add. is 00:10:5c:af:ba:a9, for safe
considering, to control the link layer of this port, PC with this MAC Add only can be made data
forwarding through Port 1, and use MAC binding function in the switch.
Switch# mac bind 1 1 00:10:5c:af:ba:a9
Switch# show mac bind
module/port VLAN macAddress STATUS
1 1 00:10:5c:af:ba:a9 Active
If vlanud and mac-address parameter has not been input when to carry out auto binding MAC
Add. to bind relative items in ARL Table. For auto binding MAC Add, invalid or failed MAC Add
binding maybe caused by follows: 802.1x status of this port has been set into Auto,
Force-authorized or Force-unauthorized; this port has been bound with MAC Add.; there is not
relative item in ARL Table. For manual binding with MAC Add., invalid or failed MAC Add.
binding maybe caused by follows: 802.1x status of this port has been set into Auto,
Force-authorized or Force-unauthorized; this port has been bound with items with the same
VLAn and MAC Add; this port has been bound with 128b MAC Add.