UTStarcom iSpirit 3026 Manual page 102

all users under this port only after authenticated can visit Internet.
The following command under global CONFIG mode sets the port into Auto status:
dot1x control auto {<port>|<port1-port2>} [<port>|<port1-port2>] ...
The following command under PORT RANGE mode sets the port into Auto status:
dot1x control auto
The following command under CONFIG mode sets the port into Force-authorized
status:
dot1x control force-authorized {<port>|<port1-port2>} [<port>|<port1-port2>] ...
The following command under PORT RANGE mode sets the port into
Force-authorized status:
dot1x control force-authorized
The following command under global CONFIG mode sets the port into
Force-unauthorized status:
dot1x control force-unauthorized {<port>|<port1-port2>} [<port>|<port1-port2>] ...
The following command under PORT RANGE mode sets the port into
Force-unauthorized status
dot1x control force-unauthorized
The following command under global CONFIG mode sets the port into N/A status
no dot1x control {<port>|<port1-port2>} [<port-|<port1-port2>] ...
The following command under PORT RANGE mode sets the port into N/A status
no dot1x control
Notes:
The port cannot be set into Auto, Force-authorized, and Force-unauthorized mode if the port has
been bound with MAC Add.
4. Configure re-authentication system
In order to prevent switch and authentication server system from being unaware of supplicant
system's abnormal leave, iSpirit 3026 switch provides re-authentication system, after every
interval the switch starts an authentication.
The following command under global CONFIG mode starts re-authentication system
dot1x reauthenticate
The following command under global CONFIG mode closes re-authentication system
no dot1x reauthenticate
The following command under global CONFIG mode set the interval for