UTStarcom iSpirit 3026 Manual page 56

untagged {<port>|<port1-port2>} [<port>|<port1-port2>] ...
To delete untagged ports under VLAN mode:
no untagged {<port>|<port1-port2>} [<port>|<port1-port2>] ...
To add untagged ports to one or multiple contiguous VLANs under PORT RANGE
mode:
untagged-vlan {<vlanid>|<minvlanid-maxvlanid>} [<vlanid>|<minvlanid-maxvlanid>]...
To delete ports from one or multiple contiguous VLANs under PORT RANGE mode:
nountagged-vlan{<vlanid>|<minvlanid-maxvlanid>}[<vlanid>|<minvlanid-maxvlanid>]
...
Notes:
If a port already belongs to a private VLAN, it can't be an untagged member of a normal VLAN;
If a port already belongs to a normal VLAN as untagged, it should be deleted from the VLAN,
before adding it to a private VLAN.
3. To configure a tagged member of a VLAN
At the iSpirit 3026 switch, users can set tagged member ports for one or multiple contiguous
VLANs either under the VLAN configuration mode or under the PORT RANGE mode.
To add tagged ports under VLAN mode:
tagged {<port>|<port1-port2>} [<port>|<port1-port2>] ...
To delete tagged ports under VLAN mode:
no tagged {<port>|<port1-port2>} [<port>|<port1-port2>] ...
To add tagged ports to one or multiple contiguous VLANs under PORT RANGE mode:
tagged-vlan {<vlanid>|<minvlanid-maxvlanid>} [<vlanid>|<minvlanid-maxvlanid>] ...
To delete ports from one or multiple contiguous VLANs under PORT RANGE mode:
notagged-vlan {<vlanid>|<minvlanid-maxvlanid>} [<vlanid>|<minvlanid-maxvlanid>] ...
4. To show VLAN information
At the iSpirit 3026 switch, users can show VLAN information under multiple configuration modes,
including VLAN overview and member ports information.
To show VLAN information: without any parameter, it will show overview information for
all VLANs; with VLAN ID parameters, it will show member ports for one or multiple contiguous
VLANs.
Show vlan [<vlanid>|<minvlanid-maxvlanid>]