Table of Contents
Advertisement
nterface instruction
10/100Base-T Port
Standard RJ-45 connecter is adopted on 10/100Base-T ethernet port. Inside of TD and RD of
the port is to be intercrossed. The self-arrangement between direct reticle and intercrossed
reticle can be realized by switch, so both connected reticle and intercrossed reticle can be
adopted when switch connected to these ports
Figure B-1. Pin Arrange Of 10/100 Base-T Port
10/100/1000 Base-T port
Standard RJ-45 interface and inside pin arrangement are adopted on 10/100/1000 Base-T port.
Inside of TD and RD of the port is to be intercrossed. The self-arrangement between direct
reticle and intercrossed reticle can be realized by inner hardware, so both connected reticle and
intercrossed reticle can be adopted when it is connected to these ports. 10/100/1000Base-T port
pin is shown in Fig B-1.
Control port
Standard 9 pin UART interface is adopted on switch. Picture of Pin on UART port is shown in
Figure B-2.
5
4
3
2
1
9
8
7
6
Figure B-2 .Pin of UART Port
Pin instruction of special cable of control port is shown in sheet B-3. Sheet B-3 Pin instruction of
special cable of control port
Signal on a
Signal on the other
Pin
9-pin
port of cable
cable
Advertisement
Table of Contents
