Table of Contents
Advertisement
Figure 18-13 Port Configuration/Stat. Message Page
(2) Port aggregation configuration page
Figure 18-14 shows Port aggregation configuration page which allow user perform configuration
of port aggregation; it consists of three parts: port aggregation group NO. selection, Port list
selection and Port aggregation manner selection.
To set up or amend port aggregation, user should select a port aggregation group NO which
covers from 0 to 5. User clicks relevant port aggregation NO. in dialog box with port aggregation
message displaying in the active line on which user can select port aggregation manner and
aggregate port list. After configuration, user should press Apply or SAVE key.
The switch provides 6 types of ports: based on original MAC address, based on purpose MAC
address, based on combined original & purpose MAC address, based on original IP address,
based on purpose IP address, all of which can be adopted to second-class transmission of data
Package, but only the last three can be adopted to third-class transmission.
At most 6 groups of port aggregation can be supported by iSpirit3026 switch with at most 8
100M ports can be supported by each group of ports
Advertisement
Table of Contents
