Commands explanation:
?:
to get help information
@: to start the image program
b<n>:
to display or change the activated mode
p:
to show startup parameters
c:
to set startup parameters
P:
to show all PCI devices
2.5.3 Upgrading Hyper OS using console port
At the prompt "[Switch Boot]:", type a capital "§", after a series of "§" signs ? are shown, choose
the "transfer" option from the terminal menu. set the protocol parameter to 1K Xmodem, then
click on the "transfer" button, which will start the downloading.
2.6 Next Step
Users can refer to the following chapters for more information on configuration and
management.
Figure2-12.Setup by users