Table of Contents
Advertisement
Figure 18-23 SNMP TRAP Page Of Configuration
(2) SNMP sharing page of configuration
SNMP sharing page of configuration (see 18-24) allow user to set up the name and read limit of
sharing of switch, and 8 entries is allowed to be set up.
The switch has a sharing with name public in default and read-only purview; compared to this
the page has only one active entry with sharing name public and read-only purview. When the
switch controls the network system through SNMP, user should set up a sharing with
read-write-able purview.
Figure 18-24 SNMP Sharing Configuration Page
8. Configuration of STP
(1) Parameter configuration page of Bridge
Parameter configuration page of Bridge (Fig 18-25) allow the user check the appointed
information of Bridge and configuration information of Bridge which can be amended.
User can amend the priority of Bridge with the default number is 32768. The lower the priority is,
the bigger the possibility of Bridging. Do not change the time parameter on the page in normal
condition because the parameter value is the defaulted standard value of STP protocol
Advertisement
Table of Contents
