Private Vlan Configuration Examples - UTStarcom iSpirit 3026 Manual

To disable a group
disable
Notes:
You can only modify the configuration when a VLAN group is inactive; otherwise, they can't be
changed. So to change configuration, you have to disable a VLAN group first, and then enable it
again.
7. To show group information
To show VLAN groups information either under overall configuration mode or PRIVATE
VLAN mode, group-id: 1-12. Without group-id, it will show all 12 groups information; with
group-id, just shows the specified group:
show privatevlan [group-id]

4.3 Private VLAN configuration examples

Figure4-3. example