Table of Contents
Advertisement
Figure 18-35. Pile Member Page
11. Super-safety configuration
(1) IP address binding configuration page
IP address binding configuration page (Figure18-36) allows the user to bind one or more IP
address on one port (at most 128 IP addressed; it depends on the application of FFP). Only
mainframe with the bound IP address instead of un-bounded IP address can access the internet.
When user performs the IP address binding, IP address port should be selected first, then input
IP address into the port to perform binding. When there is no entries on the page, it means that
no IP address is bound on the port; when there are many entries in the list, it means that IP
address is bound.
When user unbinds the port, you can mark on small frame in front of IP address need to be
unbound, then click key of unbinding to unbind. If users want to unbind all the IP address on the
port, you can click key of select all and select binding key. If IP address is wrong when binding
an IP address, system will give the alarm message that reminding user the wrong IP address as
shown in Figure 18-27
When user input MAC address, the port allows the data with the same IP address and same
MAC address to be transmitted. Whether MAC address is input is selectable. But the alarm
message (Figure 18-23) is still shown if MAC address is wrong.
Advertisement
Table of Contents
