multi-broadcast group configured by user display in the box list. If the VLAN does not exist or the
MAC address is not the MAC the multi-broadcast group can not be set up. See the wrong
indication happened when MAC is not the multi-broadcast group on Fig 18-22
To change the existing multi-broadcast group, user should click relevant multi-broadcast group
in the box list which is displayed in the active line, then the list data of port of multi-broadcast
group can be amended, after that user should press APPLY or SAVE key. To delete the
multi-broadcast group, user should click relevant multi-broadcast group in the list box which is
displayed in the active line, then press Delete key to delete the multi-broadcast group and the
data in the box list is to be deleted, too.
255 multi-broadcast groups can be supported by Switch iSpirit3026 at most. A port might not be
a member of the multi-broadcast group, and it might be. To amend the port list of multi-broadcast
group, user should click mouse at each port and switch between – and M. Meaning of the
characters on the port of page is displayed in Table 18-6
Table 18-6
Character
-
M
Figure 18-21 Static Multi-Broadcast Group Configuration Page
Full Name
Non-member
Member
Meaning
The port is not the member of this
The port is the member of this