PalProg end
Remaining time until the palletising rows (pallet)
are full.
Total
Total number of parts processed
with this palletising program.
PalReset
Zeros the palletising counter of the selected
PalProg.
Counter reset
Counter is zeroed.
CURR quantity
Total number of parts already processed
DES quantity
Number (quantity) entered in the palletising
program.
Section 2
Page 20
Desired position
Position where the next part will be placed.
CURR position
Current positions of the individual axes.
Various input parameters are displayed together
with these values.
Input parameters (refer to "Palletising programs"
in the handbook)
Status pages
A: R104GB02A.PMD
B: R104DE02A.PMD
E: 290304 / TCS
G: 140404 / T. Wenger