Battenfeld UNIROB R10S User Manual page 27

Menu pages - General
Printouts contain the contents of alarm
protocols, job data, logbooks and notepads.
Note
It is never possible to select more than one
of these jobs.
Target
You can select from various targets.
To file:
A file is created on the data carrier in the
control system.
A: R104GB01A.PMD
B: R104DE01A.PMD
E: 290304 / TCS
G: 140404 / T. Wenger
Serial printer:
The data are outputted to the control system
in series via the serial interface (RS232).
A serial printer can be connected here.
SGM (optional):
You can also transfer the selected data
to a printer which is connected to the
IMM (injection moulding device). (Only
possible with Battenfeld plastic injection
moulding machines)
IMM settings. (refer to the IMM
handbook).
USB:
The data are outputted via the USB
interface on the manual control device. A
USB printer can be connected here.
Section 1
Page 7