Status pages
All the digital outputs belonging to the periphery
interface are shown here.
digital output set to logic "0"
digital output set to logic "1"
Each periphery is matched to an individual
application. The user can therefore rename
each of the digital inputs and outputs according
to their specific function.
Simply press the Service key
the periphery interface configuration page. Refer
to the Service pages section.
Note
User level 30 or higher is required here.
A: R104GB02A.PMD
B: R104DE02A.PMD
E: 290304 / TCS
G: 140404 / T. Wenger
to switch to
Section 2
Page 17