Battenfeld UNIROB R10S User Manual page 22

Select the "Change User" touch key to change
the Name/Password.
To delete a user it is necessary to enter his/her
name under "User Name". Then select "Delete
User".
Password system
The following User levels are intended for use with
the UNILOG B4 control system:
User level 90
No User is logged in. He/She can therefore not
change, load or delete the Automatic program.
He/She may operate the robot in Manual mode
and also start and stop the loaded sequential
program in Automatic mode.
User level 30
At User level 30 the user may change, load,
delete and save the User program as well as
start the Automatic function.
Section 1
Page 2
User level 20 (Customer service)
User level 20 users have the same rights as User
level 30 users. In addition, he/she is authorised to
change lock areas, axis and gripper names,
periphery inputs and outputs as well as gripper
and axis configurations.
User level 10 (Battenfeld service)
List of users
All registered users are listed here.
Notepad
On the notepad page you can enter text which
you think may be relevant to the operating
procedures.
Menu pages - General
A: R104GB01A.PMD
B: R104DE01A.PMD
E: 290304 / TCS
G: 140404 / T. Wenger