Battenfeld UNIROB R10S User Manual page 19

Operation and Control System
Other operating features
In addition to entering numeric and
alphanumeric data it is possible to change
values/objects using the following symbols.
Object deactivated
Object activated
Object selected and deactivated
Object selected and activated
The value can be changed depending upon the
menu item.
The current status of each object is highlighted
in green/grey.
Object deactivated
Object activated
These symbols are used especially where there
are only two statuses.
(ON/OFF, SET/RESET etc.)
A: R104GB00A.PMD
B: R104DE00A.PMD
E: 290304 / TCS
G: 290304 / TCS
Touch keys
Each page of the UNILOG B4 control system
contains various touch keys. Each of these keys
activates different functions depending upon the
label and how it is displayed.
Examples include:
Confirm key
Log in
Selected axis
Section 0
Page 15