Using Pim With Other Features; Pim With Acls Or Vmaps; Pim With Igmp - Lenovo Flex System Fabric CN4093 Application Manual
How to configure and use the enterprise nos 8.4 software on the 10 gb converged scalable switch
Hide thumbs
Also See for Flex System Fabric CN4093:
- Application manual (598 pages) ,
- Installation manual (72 pages) ,
- User manual (58 pages)
Table of Contents
Advertisement
Using PIM with Other Features
PIM with ACLs or VMAPs
PIM with IGMP
504
CN4093 Application Guide for N/OS 8.4
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
If using IGMP (see "Internet Group Management Protocol" on page
IGMP static joins can be configured with a PIM‐SM or PIM‐DM multicast group
IPv4 address. Using the ISCLI:
CN 4093(config)# ip mroute <multicast group IPv4 address> <VLAN> <port>
IGMP Query is disabled by default. If IGMP Querier is needed with PIM, be sure
to enable the IGMP Query feature globally, as well as on each VLAN where it is
needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable
IGMP snooping globally, as well as on each VLAN where PIM receivers are
attached.
435):
Advertisement
Table of Contents
