Using Pim With Other Features; Pim With Acls Or Vmaps; Pim With Igmp - Lenovo CN4093 Application Manual

Using PIM with Other Features

PIM with ACLs or VMAPs

PIM with IGMP

484
CN4093 Application Guide for N/OS 8.3
If using ACLs or VMAPs, be sure to permit traffic for local hosts and routers.
If using IGMP (see "Internet Group Management Protocol" on page
 IGMP static joins can be configured with a PIM-SM or PIM-DM multicast group
IPv4 address. Using the ISCLI:
CN 4093(config)# ip mroute <multicast group IPv4 address> <VLAN> <port>
 IGMP Query is disabled by default. If IGMP Querier is needed with PIM, be sure
to enable the IGMP Query feature globally, as well as on each VLAN where it is
needed.
If the switch is connected to multicast receivers and/or hosts, be sure to enable

IGMP snooping globally, as well as on each VLAN where PIM receivers are
attached.
415):