Replacing A Projector's Foot - Christie HS 2K Series Service Manual

13. Remove the 28 M3 screws with a Phillips #1 screwdriver securing the bottom cover.
14. Remove the base shielding from the bottom cover.
15. If required, replace the bottom cover.
16. To re-install, follow these steps in reverse order.

Replacing a projector's foot

The adjustable feet can be raised or lowered when positioning the projector to make sure it is level
on all sides so the displayed image appears rectangular without any keystone.
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless the
projector is securely positioned.
2. Remove the top cover.
See Removing the top cover
3. Remove the main board module.
See Replacing the main board
4. Remove the main board bottom shielding.
See Removing the rear cover
5. Remove the rear cover.
See Removing the rear cover
6. Remove the I/O board.
See Removing the I/O board
7. Remove the front cover.
See Removing the front cover
8. Remove fan 7.
See Replacing fan 7
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
on page 59.
on page 94.
on page 59.
on page 59.
on page 99.
on page 61.
on page 69.
Projector covers and feet
65