Replacing A Projector's Foot - Christie GS Series Service Manual

Replacing a projector's foot

The adjustable feet can be raised or lowered when positioning the projector to make sure it is level
on all sides so the displayed image appears rectangular without any keystone.
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless the
projector is securely positioned.
2. Remove the top cover.
See Removing the top cover
3. Remove the main board and I/O board.
See Replacing the main board and I/O board
4. Remove the rear cover.
See Removing the rear cover
5. Loosen the lock nut on the affected foot with a M6 socket driver.
6. Uninstall the foot.
7. Replace the foot.
8. Repeat steps 2 and 6 for any additional feet that need to be replaced.
9. To re-install, follow these steps in reverse order.
GS Series 630-635 Service Manual
020-001224-02 Rev. 1 (08-2018)
on page 51.
on page 69.
on page 52.
Projector covers and feet
56