Removing a projector's foot
The adjustable feet can be raised or lowered when positioning the projector to make sure it is level on
all sides so the displayed image appears rectangular without any keystone.
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless
the projector is securely positioned.
2. Loosen the lock nut on the affected foot.
3. Uninstall the foot.
4. Replace the foot, if required.
5. To re-install, follow these steps in reverse order.
Crimson Service Guide–Crimson HD25, Crimson WU25, Crimson HD31, Crimson WU31, Mirage HD25, Mirage WU25
020-102733-02 Rev. 1 (01-2020)
Copyright
2020 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers
45