Replacing A Projector's Foot - Christie Boxer 4K Series Service Manual

4. If required, replace the bottom cover.
5. To install the bottom cover, repeat these steps in reverse order.

Replacing a projector's foot

The adjustable feet can be raised or lowered when positioning the projector to make sure it is level on
all sides so the displayed image appears rectangular without any keystone.
Estimated replacement time: 3 minutes for servicing a single foot
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless
the projector is securely positioned.
2. Loosen the lock nut on the affected foot.
3. Uninstall the foot.
4. Replace the foot.
5. To re-install, follow these steps in reverse order.
Boxer 4K Service Guide
020-101699-04 Rev. 1 (02-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
37