Initial Programming (Figure 2-22)2 - NEC Aspila EX Hardware Manual

CÔNG TY VIỄN THÔNG VIỆT PRO
Initial Programming (Figure 2-22)
The system can be programmed using three methods:
• Programming through a digital system phone with LCD display
• PC Programming
• Web Programming
Refer to the Aspila EX Software Manual for complete details on programming.
Entering the Programming Mode
Enter the system programming mode at any system phone with an LCD display:
1.
2.
3.
4.
Port Defaults
With the default settings, the ports are assigned as follows:
Aspila EX Hardware Manual
Chuyên phân phối tổng đài NEC
Section 2: PCB Installation and Startup
Refer to the PCPro/WebPro Installation Manual, for complete installation details.
Refer to the PCPro/WebPro Installation Manual, for complete installation details.
Press CALL1. (You hear dial tone).
Dial # * # *.
Dial the system password.
Press HOLD.
The system allows up to two people to be in program mode at one time. If both program-
mers are making entries to the same program, the system will accept the entries made by the
last person in that program.
Station Ports:
Virtual Station Ports:
Trunk Ports:
Figure 2-22: TELEPHONE KEY LAYOUT
Password Level
12345678 2 (IN)
0000 3 (SA)
9999 4 (SB)
1-512 (ports 1-300 = extensions 200-499)
1-256 (extensions not assigned)
1-200
Section 2: PCB Installation and Startup
http://vietpro.com.vn
2
2-51