Miscellaneous Trunk Access-Pri - NEC NEAX 2400 IPX Programming Manual

M-71

MISCELLANEOUS TRUNK ACCESS-PRI

1. General Description
This feature provides access to all types of external and customer provided equipment/facilities such as Tie
[T-3], and Exchange Network along with PAGING [P-1].
2. Operating Procedure
MISCELLANEOUS TRUNK ACCESS-PRI is accomplished via System Data at the Maintenance
Administration Terminal (MAT).
3. Assignment Procedure
STEP 1: ARTD - Refer to the Feature listing for the type of trunk route to be accessed.
STEP 2: ATRK - Assign the LENs, Route Number, Trunk Number, and Tenant Number.
STEP 3: MBTK - Assign the Make Idle status to the trunks.
STEP 4: ANPD - Assign a level for trunk access. Assign Connection Indexes (CI) for Normal and Hooking
STEP 5: ASPA - Assign the access code as indicated by the level assigned in ANPD. Type of Service, SRV
STEP 6: ARSC - Assign a Route Restriction Class (RSC) that is allowed in Route Restriction Indexes (RRI)
STEP 7: ASDT - Assign an RSC to the stations which allows access to these trunks.
service. Number of Necessary Digits is assigned according to a predetermined numbering
plan. Busy Lamp Field is not activated.
= OGC for Outgoing trunks.
0, 1, 2 and 3 to the station that is allowed access to these trunks.
MISCELLANEOUS TRUNK ACCESS-PRI
NDA-24305 CHAPTER 5
Page 109
Revision 1.0