Unthreading The Wire Electrode - Fronius LaserHybrid Ultracompact Twin Operating Instructions Manual

Unthreading the IMPORTANT!
wire electrode -
-
Requirement:
-
-
-
80
Depending on the circumstances, the lead or trail electrodes can be changed individ-
ually or at the same time.
Read and observe the safety rules, safety instructions and all documentation relating
to the unreeling wirefeeders.
2 x stand-alone unreeling wirefeeders (e.g. WF 25i REEL R /SA//2R/G/W)
Unreeling wirefeeders assembled and fitted according to Operating Instructions, In-
stallation Instructions, etc.
The power source must be switched on and the coolant supply must be switched off.
Cut off the wire electrodes in front of
1
the gas nozzle
Remove the gas nozzle
2
(2.5 mm Allen key)
Unscrew the contact tips
3
(7 mm flat spanner)