Commissioning (Overview) - Fronius LaserHybrid Ultracompact Twin Operating Instructions Manual

16
17
Commissioning Commissioning the laser welding head comprises the following sections:
(overview) -
-
-
-
-
-
-
-
-
-
Connect the remote controls
Establish grounding (earthing) connections between the workpiece and power sourc-
es "1" and "2"
IMPORTANT!
- Use a separate grounding cable
- Lay the grounding cable in a loop
Fitting the laser welding head to the robot
Connecting the LaserHybrid Ultracompact Twin hosepack to the laser welding head
Connecting the laser optics system, Crossjet and additional extractor
Laying the hosepack on the robot
Threading the wire
Setting up the laser welding head
Setting the radial air flow
Creating a reference program and checking the position of the wire electrode in rela-
tion to the focal point of the laser
Signal sequence for LaserHybrid welding
Measures to be taken before the start of welding
45