General; Proper Use/Intended Purpose; Advantages - Fronius LaserHybrid Ultracompact Twin Operating Instructions Manual

General

General
Proper use/in- The LaserHybrid ultracompact Twin is intended exclusively for MAG tandem (Twin) weld-
tended purpose ing.
Utilisation for any other purpose, or in any other manner, shall be deemed to be not in ac-
cordance with the intended purpose.
The manufacturer shall not be held liable for any damages arising from such usage.
Proper use also includes
-
-

Advantages

Advantages of the laser welding head:
-
-
-
-
-
-
-
-
-
-
-
Advantages of the laser-twin welding process:
-
-
-
-
Complying with all the instructions from the respective Operating Instructions for the
individual components
Performing all stipulated inspection and maintenance work
High welding speed and therefore highly cost-effective
High process stability combined with low reject numbers and little need for rework
High weld seam quality
Low heat input, low distortion
High availability of welding system, long service life for wearing parts
Flexibility
Good gap tolerance
Can be adapted for fibre, disc and diode lasers
No slip in the hosepack, resulting in a stable arc
Few wearing parts - low maintenance costs
Simple layout
Arc can be controlled selectively
Minimal arc blow during pulsed arc
Small weld pool due to short arc, which results in a high welding speed
Same menu navigation as the TPS 4000/5000
The LaserHybrid Ultracompact Twin is a
further development of the LaserHybrid Ul-
tracompact head.
The LaserHybrid Ultracompact Twin head
is used specifically for components requi-
ring high welding speeds.
Throughout the rest of these Operating Ins-
tructions, the LaserHybrid Ultracompact
Twin head is referred to as the laser wel-
ding head.
Alongside the laser welding head, the laser-
twin welding process is also described in
these Operating Instructions.
21