Connector Specifications - Omron R88M-K Series User Manual

3-4 Cable and Connector Specifications

Connector Specifications

Control I/O Connector (R88A-CNW01C)
This is the connector to be connected to the drive's control I/O connector (CN1).
Use this connector when preparing a control cable by yourself.
Dimensions
3
t = 18
Encoder Connectors
These connectors are used for encoder cables.
Use them when preparing an encoder cable by yourself.
Dimensions
R88A-CNW01R (Drive's CN2 side)
This connector is soldered.
Use the following cable.
Applicable wire: AWG16 max.
Insulating cover outer diameter: 2.1 mm dia. max.
Outer diameter of sheath: 6.7 ± 0.5 mm dia.
t = 12
3-67
39
43.5
OMNUC G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Connector plug model
10126-3000PE (Sumitomo 3M)
Connector case model
10326-52A0-008 (Sumitomo 3M)
Connector plug model
55100-0670 (Molex Japan)