Omron R88M-K Series User Manual page 158

3-4 Cable and Connector Specifications
Power Cable Connector (R88A-CNK11A)
This connector is used for power cables.
Use it when preparing a power cable by yourself.
3
Angle plug model JN8FT04SJ1
Socket contact model ST-TMH-S-C1B-3500-(A534G)
Brake Cable Connector (R88A-CNK11B)
This connector is used for brake cables.
Use it when preparing a brake cable by yourself.
Angle plug model JN4FT02SM-R
Socket contact model ST-TMH-S-C1B-3500-(A534G)
3-69
Angle plug direction can be reversed.
Note: You cannot install the angle plug to Servomotors of 50 W
17.6
R5.5
12
28.8
(Japan Aviation Electronics)
(Japan Aviation Electronics)
29.6
17
12.3
(Japan Aviation Electronics)
(Japan Aviation Electronics)
OMNUC G5-series AC Servomotors and Servo Drives User's Manual (with Built-in EtherCAT Communications)
Applicable motors
100-V, 3,000-r/min Servomotors of 50 to 400 W
200-V, 3,000-r/min Servomotors of 50 to 750 W
and 100 W when its cable pull-out direction is reversed.
14.7
Applicable motors
100-V, 3,000-r/min Servomotors of 50 to 400 W
200-V, 3,000-r/min Servomotors of 50 to 750 W
Angle plug direction can be reversed.
12.7
R6
11
R4