Danfoss VLT FC 103 Programming Manual page 50

Parameter Description
2-16 AC brake Max. Current
Range: Function:
100 % [ 0 - 1000.0 Enter the maximum permissible current
*
%] when using AC brake to avoid
overheating of motor windings. The AC
brake function is available in Flux mode
only.
NOTE
2-16 AC brake Max. Current will not have effect when
1-10 Motor Construction = [1] PM, non salient SPM.
2-17 Over-voltage Control
Option:
[0] Disabled No OVC required.
[2] Enabled Activates OVC.
*
NOTE
2-17 Over-voltage Control will not have effect when
1-10 Motor Construction = [1] PM, non salient SPM.
NOTE
The ramp time is automatically adjusted to avoid tripping
of the frequency converter.
®
VLT Refrigeration Drive Programming Guide
Function:
®
MG16H102 - VLT is a registered Danfoss trademark
3 3
49