Danfoss VLT FC 103 Programming Manual page 34

Parameter Description
0-37 Display Text 1
Range: Function:
0 [0 - In this parameter it is possible to write an individual
*
0 ] text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 1 in 0-20 Display Line 1.1 Small,
0-21 Display Line 1.2 Small, 0-22 Display Line 1.3 Small,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large.
▲ ▼
Press [ ] or [ ] to change a character. Press [
▶
[ ] to move the cursor. When a character is
highlighted by the cursor, it can be changed. Press
▲ ▼
[ ] or [ ] to change a character. A character can be
inserted by placing the cursor between two
characters and pressing [
0-38 Display Text 2
Range: Function:
0 [0 - In this parameter it is possible to write an individual
*
0 ] text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 2 in 0-20 Display Line 1.1 Small,
0-21 Display Line 1.2 Small, 0-22 Display Line 1.3 Small,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large.
▲ ▼
Press [ ] or [ ] to change a character. Press [
▶
[ ] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between two characters and pressing [
▼
[ ].
0-39 Display Text 3
Range: Function:
0 [0 - In this parameter it is possible to write an individual
*
0 ] text string for display in the LCP or to be read via
serial communication. If to be displayed permanently
select Display Text 3 in 0-20 Display Line 1.1 Small,
0-21 Display Line 1.2 Small, 0-22 Display Line 1.3 Small,
0-23 Display Line 2 Large or 0-24 Display Line 3 Large.
▲ ▼
Press [ ] or [ ] to change a character. Press [
▶
[ ] to move the cursor. When a character is
highlighted by the cursor, this character can be
changed. A character can be inserted by placing the
cursor between two characters and pressing [
▼
[ ].
3.2.4 0-4* LCP Keypad
Enable, disable and password protect individual keys on
the LCP.
®
VLT Refrigeration Drive Programming Guide
◀
] and
▲ ▼
] or [ ].
◀
] and
▲
] or
◀
] and
▲
] or
®
MG16H102 - VLT is a registered Danfoss trademark
0-40 [Hand on] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1] Enabled [Hand On] key enabled
*
[2] Password Avoid unauthorized start in Hand mode. If
0-40 [Hand on] Key on LCP is included in the My
Personal Menu, then define the password in
0-65 Personal Menu Password. Otherwise define
the password in 0-60 Main Menu Password.
0-41 [Off] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1] Enabled [Off] key is enabled
*
[2] Password Avoid unauthorized stop. If 0-41 [Off] Key on LCP
is included in the My Personal Menu, then define
the password in 0-65 Personal Menu Password.
Otherwise define the password in 0-60 Main
Menu Password.
0-42 [Auto on] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1] Enabled [Auto On] key is enabled
*
[2] Password Avoid unauthorized start in Auto mode. If
0-42 [Auto on] Key on LCP is included in the My
Personal Menu, then define the password in
0-65 Personal Menu Password. Otherwise define
the password in 0-60 Main Menu Password.
0-43 [Reset] Key on LCP
Option: Function:
[0] Disabled Key disabled avoids accidental usage of the key.
[1] Enabled [Reset] key is enabled
*
[2] Password Avoid unauthorized resetting. If 0-43 [Reset] Key
on LCP is included in the 0-25 My Personal Menu,
then define the password in 0-65 Personal Menu
Password. Otherwise define the password in
0-60 Main Menu Password.
3 3
33