Danfoss VLT FC 103 Programming Manual page 15

How to Programme
[Cancel]
last change or command will be cancelled as long as the
display has not been changed.
2 2
Illustration 2.9
[Info]
displays information about a command, parameter, or
function in any display window. [Info] provides detailed
information when needed.
Exit Info mode by pressing either [Info], [Back], or [Cancel].
Illustration 2.10
Navigation Keys
The four navigation arrows are used to navigate between
the different choices available in [Quick Menu], [Main
Menu] and [Alarm Log]. Use the keys to move the cursor.
[OK] is used for choosing a parameter marked by the
cursor and for enabling the change of a parameter.
On
Warn
Alarm
Illustration 2.11
14
®
VLT Refrigeration Drive Programming Guide
OK
®
MG16H102 - VLT is a registered Danfoss trademark