Setting The Baud Rate - WAGO 750-306 Technical Description

3.2.2.8 Setting the Baud Rate

The fieldbus controller supports 3 different Baud rates, 125 kBaud, 250 kBaud
and 500 kBaud. DIP switches 7 and 8 are used to set the baud rate.
1
2
3
4
5
6
7
8
Fig. 3-27: Example: Setting the baud
rate 250 kBaud (DIP 7 = ON) on a
station (node) with the address MAC
ID 1.
The configuration is only read during the power up sequence. Changing the
switch position during operation does not change the configuration of the
buscoupler. Turn off and on the power supply for the fieldbus controller to ac-
cept the changing.
The default setting is Baud rate 125 kB.
WAGO-I/O-SYSTEM 750
DeviceNet
ON
g012541x
Feldbus-Koppler/-Controller • 69
Fieldbus Controller 750-806
Baudrate DIP7
*)
125 kBaud OFF
250 kBaud ON
500 kBaud OFF
not allowed ON
*)
Presetting
DIP8
OFF
OFF
ON
ON