WAGO 750-306 Technical Description page 55

5. Device configuration
1. To configure the device, click on its graphic to mark it, then click on the
Fig. 3-17: Device Configuration
6. Load configuration
1. To load the set configuration in the interface card, click on the master's
WAGO-I/O-SYSTEM 750
DeviceNet
menu point "Device configuration" in the "Settings" menu.
A dialog window opens permitting you to proceed with the desired set-
tings.
graphic to mark it, then click on the "Download" menu point in the "On-
line" menu.
Fieldbus Coupler/Controller • 55
Fieldbus Coupler 750-306
p112505d