WAGO 750-306 Technical Description page 96

96 • Feldbus Coupler/Controller
Fieldbus Controller 750-806
6. In the "Description" dialog box, select the "Set Single Attribute" utility and
7. Click in the " Data Sent to the device" dialog box and enter the following
10 00 06 00 20 A6 24 01 30 01 10 00 06 00 20 A6 24 02 30 01
The path is described by:
0x20 CC (Class) 0x24 II (Instance) 0x30 AA (Attribute)
8. Click on the "Execute" button to define the mapping.
In this case, check the entries for class, instance and attribute, the De-
viceNet connection and the configuration.
enter the following values in the "Object Address" dialog boxes:
- "Class": 4
– "Instance": 64 (64 hexadecimal = 100 decimal)
– "Attribute": 2.
values in hexadecimal:
If the mapping was successful, the fieldbus node sends a "performance"
confirmation.
If a fault has occurred, you will receive a fault message.
In the event of a communication or reply fault, check the DeviceNet con-
nection and whether or not the instance was correctly set.
WAGO-I/O-SYSTEM 750
DeviceNet