WAGO 750-306 Technical Description page 54

54 • Fieldbus Coupler/Controller
Fieldbus Coupler 750-306
4. Add a slave
1. Enter a fieldbus slave on the surface by clicking on the "Device" menu
2. Move this mouse pointer to the graphic display of the fieldbus, then click
3. For the fieldbus Coupler 750-306 click in the left-hand selection window
4. Take this into the right-hand window by clicking on the "Add" button and
Fig. 3-16: Configuration
point in the "Insert" menu.
The mouse pointer changes to the letter D with an arrow.
on the left-hand mouse key.
A dialog window opens permitting you to select a DeviceNet device.
Fig. 3-15: Insert slave
on the corresponding entry to mark it.
confirm by clicking on the "OK" button.
The configuration is displayed on the surface as a graphic.
p012501d
p012502d
WAGO-I/O-SYSTEM 750
DeviceNet