Setting Parameters For Inputs And Outputs; Configuring The Analog Outputs - Siemens SIPROCESS UV600 Manual

Important functions (selection)
7.5 Parameter assignments
7.5.8

Setting parameters for inputs and outputs

7.5.8.1

Configuring the analog outputs

Menu call: Parameters -> IO -> Analog output (AOn) -> AOn
The following menu is displayed (example):
The parameters have the following meanings:
Source
Zero
Range 0 Activation status of output range 0
Range 1 Activation status of output range 1
Range sel. Mode of range selection
Status
Assigning the internal signal source to an analog output
In the previous menu, select parameter 1 (Source). The following menu is displayed
(example):
142
Assigned internal signal source
Zero point of the electronic signal span
Digital output for status of output range
Operating Instructions, 10/2013, A5E03529375-02
SIPROCESS UV600