Printed Page Count; Permanent Page Count - Lexmark MX610 Service Manual

Printer default values
Default Envelope Size (envelope feeding sources which do
not have hardware size sensing capability)
Fax media size
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
To change this setting:
1
From the Diagnostics menu, navigate to:
Printer Setup > Defaults
2
Choose U.S. or Non‑U.S.
3
Do one of the following:
•
Depending on the printer model, press OK or touch
•
Press X to return to the Printer setup menu.

Printed Page Count

The value of this setting gauges the amount of usage on the printer. The value of the Printed Page Count setting will
equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset to zero.
Note: The value of the setting cannot be changed manually.

Permanent Page Count

The value of this setting indicates the total amount of pages that have been printed. After all print tests have been
completed, the value will reset to zero.
Note: The Permanent Page Count value cannot be reset.
Processor ID
This is a 16‑digit hexadecimal value representing the ID of the processor on the controller card.
Engine Setting [x]
These settings are used by Engine code ECs to fix field problems. The value of [x] is any value from 1 to 16.
Edge to Edge
When set to On, this shifts all four margins (top, bottom, left, and right) to the physical edge of the page (printable area
of a supported paper size). This feature does not work in PPDS emulation.
U.S. value
10 Envelope
Letter
PC-8
437
Inches
to save any changes.
Service menus
192
Non-U.S. value
DL Envelope
A4
PC-850
850
Millimeters
7016