Shipping Brackets And Bolts - YASKAWA MA1440 Operating And Maintenance Manual

Transportation
3.2
The robot is equipped with transport securing devices and shipping bolts to reduce external
forces to a minimum during transport.
• The shipping brackets and bolts are painted yellow.
• The shipping bracket will be fastened by 2 screws M10.
2 screws M10 x 25
1
NOTICE
Before turning ON the power, check to be sure that the shipping bolts and brackets are
removed.
After removing the transport securing devices and the shipping bolts, keep them at a safe
place. The transport securing devices and shipping bolts will be required again if the system
is transported again.
NOTICE
Before turning ON the power, check to be sure that the rubber buffer are removed.
After removing the rubber pads, keep them at a safe place. The rubber pads will be required
again if the system is transported again.
For transportation purposes the robot is fitted in the range
buffer (see ).

Shipping brackets and bolts

Fig. 3-3: Shipping brackets and bolts until August 2016
Fig. 3-4: Shipping brackets and bolts from August 2016
and with a rubber
B
A
3
-
17