Shipping Bolts And Brackets - YASKAWA MOTOMAN-MFL15D-875 Instructions Manual

MFL15D-875/-1600
2.2
2 Transporting

2.2 Shipping Bolts and Brackets

Shipping Bolts and Brackets
The manipulator is provided with shipping bolts and brackets to protect the
mechanical part of the manipulator from external force during the
transportation. (Refer to Fig. 2-1(a) "Transporting Position MFL15D-
875"and Fig. 2-1(b) "Transporting Position MFL15D-1600".)
The shipping bolts and brackets are painted yellow.
Before turning ON the power, check to be sure that all the
shipping bolts and brackets have been removed. The
NOTE
shipping bolts and brackets then must be stored for future
use, in the event that the manipulator must be moved again.
After removing the shipping bolts and brackets, the unpainted surfaces
and tapped holes must be protected with the washers and caps as shown
in Fig. 2-3(a) "MFL15D-875 Thick Washer (delivered with the manipulator)
and Cap Mounting Positions" and Fig. 2-3(b) "MFL15D-1600 Thick
Washer (delivered with the manipulator) and Cap Mounting Positions".
Fig. 2-3(a): MFL15D-875
Thick Washer (delivered with the manipulator) and Cap Mounting Positions
Flat washer M12
(2 washers)
(Tickness: 5mm)
(Nickel-plated)
Flat washer M12
(2 washers)
(Tickness: 5mm)
(Nickel-plated)
2-4
179394-1CD
Flat washer M12
(3 washers)
(Tickness: 5mm)
(Nickel-plated)
Flat washer M12
(2 washers)
(Tickness: 5mm)
(Nickel-plated)
HW1483905
20 of 74