Bin Indicators; Correcting Counter And Stacker Position; Setting The Total Counter To Zero - Pitney Bowes F612 Operating Manual

4.4 Bin Indicators

LED Status
Continuous
light
Flashing slow
Flashing fast

4.5 Correcting counter and stacker position

Step # Description
1 Reduce the total
counter value by 1
set.

4.6 Setting the Total Counter to Zero

Step # Description
1 To zero the total
counter.
Description
Double sheet/Jam detect
Misfeed indication
Comes on after the calibration cycle. The
bin sensor that is flashing is incapable of
sensing double sheets but is operational
and still capable of detecting misfeeds.
The other bins are OK and calibrated.
Action
Press and release "Counter
reset button".
Action
Press "Counter reset button" and hold
down for more than one (1) second.
Notes
Can be caused by:
Double sheets
Paper jam
Different paper quality or print
compared to the calibrated set
Reduced paper feeding
capability
Incorrect paper length
(compared to the calibrated
length)
Load/check paper.
If continuous misfeed, clean the
feed rollers (see section 5.1)
9
Operation
Notes
In offset stacking mode
the stacker will cycle
once.
Notes