Module Standby Control Register 2(Mstcr2) - Hitachi H8/3672 Series Hardware Manual

Bit Bit Name Initial Value
−
7 0
−
6 0
5 MSTS3 0
4 MSTAD 0
3 MSTWD 0
2 MSTTW 0
1 MSTTV 0
−
0 0
6.1.4

Module Standby Control Register 2(MSTCR2)

MSTCR2 allows the on-chip peripheral modules to enter a standby state in module units.
Bit Bit Name Initial Value
7to1 −
0
0 MSTPWM 0
Rev. 1.0, 03/01, page 68 of 280
R/W Description
−
Reserved
This bit is always read as 0 and cannot be modified
−
Reserved
This bit is always read as 0 and cannot be modified
R/W SCI3 Module Standby
SCI3 enters the standby mode when this bit is set to 1
R/W A/D Converter Module Standby
A/D converter enters the standby mode when this bit is set
to 1
R/W Watchdog Timer Module Standby
Watchdog timer enters the standby mode when this bit is
set to 1.When the internal oscillator is selected for the
watchdog timer clock, the watchdog timer operates
regardless of the setting of this bit
R/W Timer W Module Standby
Timer W enters the standby mode when this bit is set to 1
R/W Timer V Module Standby
Timer V enters the standby mode when this bit is set to 1
−
Reserved
This bit is always read as 0 and cannot be modified
R/W Description
−
Reserved
These bit are always read as 0 and cannot be modified
R/W PWM Module Standby
PWM enters the standby mode hen this bit is set to 1